Telnet Commands Common To The Camera And Decoder: Camera Control; Camera Home - VADDIO EasyIP Systems Complete Manual

Telnet Commands Common to the Camera and Decoder: Camera Control
The following commands are valid for the EasyIP Decoder and EasyIP 10 cameras:

camera home

n
camera pan
n
camera tilt
n
camera zoom
n
camera focus
n
camera preset
n
camera ccu get/set
n
camera standby
n
When sending any of these commands to the EasyIP Decoder, you must specify the camera input.
camera home
E IP 10
ASY
E IP D
ASY ECODER
Moves the camera to its home position.
When sending the command to the EasyIP Decoder, you must specify the camera input.
Synopsis camera <input>* home
* <input> used only when sending commands to the EasyIP Decoder
Options <input>
Example camera 1 home
OK
>
(Sent from the EasyIP Decoder) Moves the camera paired to input 1 to its home
position.
Complete Manual for EasyIP Systems
Integer 1 to 4; specifies the camera to control.
50