Decommissioning �8; Place Change; Temporary Decommissioning; Disposal - Bosch TCE 5310 Original Instructions Manual

en �4 | T�� ���� | Decommissioning
7. Decommissioning
7.�

Place change

Procedure:
1. Disconnect electrical connection.
2. Follow what shown for first start up (see chap. 4.2).
i
In case of sale or transfer of TCE 5310, all the docu-
ments included in the consignment volume has to be
integrally handed over together with the equipment.
7.2

Temporary decommissioning

If the TCE 5310 is going to be stopped for a limited
period of time or if the equipment is not being used
for other reasons, always disconnect the network plug
from its socket!
It is suggested to clean accurately the TCE 5310, also
its tools and accessories, and carry out a protection
treatment (e.g. spraying of a thin oil film).
7.�

Disposal

¶
Disconnect the TCE 5310 from the mains tension
and take off the power supply cable.
¶
Oil are water pollution risk fluids and have to be
disposed of in accordance with the rules in force.
¶
Disassemble the TCE 5310, order the materials ac-
cording to the category it belongs to and dispose of
them according to the rules in force.
T�� ���� complies to the rules of the �uro-
pean directive 2��2/96/�� (directive on the
disposal of electrical and electronic waste).
Electric and electronic devices which are out
of order, together with their cables, accesso-
ries, accumulators and batteries, have to be
disposed of separately from household waste.
¶
For disposal of such products, use the
available return and collection systems.
¶
The correct disposal of the TCE 5310
makes it possible to avoid environmental
damage and to put at no risk the life of
people.
|
1 695 301 840 2011-07-14
8. Technical data
8.� T�� ����
Function
Maximum noise level
Working hydraulic pressure
Power supply tension
8.2

Dimensions and weights

Function
TCE 5310 (A x L x P)
Net weight
Gross weight
8.�

Reach

Function
Tire width
Maximum tire diameter
Maximum tire width
Specifications
75 dB
20 – 130 bar
depending on the cho-
sen tension (see iden-
tification plate)
Specifications
1750 x 2200 x 1750 mm
882 kg
1003 kg
min / max
14"– 42" (with optional ex-
tension up to 56")
2300 mm
910 mm
Robert Bosch GmbH