Table of Contents
Advertisement
Available languages
Available languages
1.
Symbols used
�.�
In the documentation
�.�.�
Warning notices - Structure and meaning
Warning notices indicate hazards and their consequen-
ces for the user or surrounding persons. Warning notices
also describe the measures for preventing these hazards.
The signal word has a crucial importance. It indicates
the probability of occurrence and the severity of the
hazard in case of non-compliance:
Signal
Probability of
word
occurrence
DANG�R
Immediate impending
danger
WARNING
Possible impending
danger
�AUTION
Possible dangerous
situation
Below you will see an example of the "Live parts"
warning notice by way of example, with the signal word
DANG�R:
DANG�R – �xposure of live parts on open-
ing the T�� ����!
Risk of (fatal) injury or heart failure from elec-
tric shocks on contact with live components
(e.g. master switch, printed circuit boards).
¶
Work on electrical installations or equip-
ment is only to be performed by qualified
electricians or trained personnel under the
guidance and supervision of an electrician.
¶
Disconnect TCE 5310 from the mains be-
fore opening.
�.�.2
Symbols in this documentation
Sym-
Designation
�xplanation
bol
Attention
Warns about possible property damage.
!
Information
Practical hints and other
i
useful information.
1.
Multi-step op-
Instruction consisting of several steps
2.
eration
One-step oper-
Instruction consisting of one step.
e
ation
Intermediate
An instruction produces a visible inter-
result
mediate result.
Final result
There is a visible final result on comple-
"
tion of the instruction.
Robert Bosch GmbH
�.2
!
�.�
!
Severity of danger
if instructions not
observed
Death or severe
injury
Death or severe
injury
Minor
injury
Symbols used | T�� ���� | 2�
On the product
Observe all warning notices on products and ensure
they remain legible!
Additional adhesive tags
Respect all the safety instructions and danger war-
nings on the products and keep the related tags in
full readable conditions!
Mains tension
Danger of electrical shock when touching the
parts of the electrical system.
Wheel unlocking
Danger of crushing in the area close to the
wheel locking assembly.
Working arm fitting
Danger of crushing in the area close to the
working arm.
T�� ���� | 2�
| 2�
en
|
1 695 301 840
2011-07-14
Advertisement
Chapters
Table of Contents
