Quad Pump Manual Control - Quadra Bigfoot User Manual

Quad Pump Manual Control

Simultaneous and individual operation makes this control great for many applications.
Individual all up indication when each cylinder is fully retracted, ("JACKS UP" lights).
Ignition safety feature, disables extend functions when ignition is on.
One touch retract (all four jacks), automatically cuts power to each pump as they retract.
Ignition alarm if one or more jacks are not fully retracted when ignition is on, audible alarm will sound.
Extend All: Press & hold to extend all four jacks simultaneously.
Retract All: Retracts all four simultaneously until all four "JACKS UP" lights turn on. Always visually check that
all jacks are fully retracted prior to operating the vehicle. If you have an all up light, but one of the cylinders
not fully retracted, enter Retract Mode, and operate that cylinder (see instructions below, then see limit
switch maintenance when ready to look at this further).
For individual operation: Press and release Extend Mode button, press and hold corresponding jack you want
to extend. Do the same for retract function. In case of limit switch failure or "false all up light" (jack not fully
retracted but it's "up" light is on)... Press Retract Mode and run that particular jack to override the limit switch,
then replace switch and pin.
Replacement #M37002
11