Faqs - EcoFlow R600 User Manual

FAQs

How do I clean for R600?
The R600 is a versatile tool on many adventures, so that simple cleaning will likely be required from time to
time. Use dry, non-abrasive cloths to wipe. If you need to clean more thoroughly, we recommend that you use
detergent that used for cleaning mobile phones and computer screens. Do Not expose R600 to lots of liquid.
How do I store R600?
Please store R600 in a dry and cool place. DO NOT place it near water. If you need to store R600 for a long
time, please charge the battery to around 85%, in order to extend battery life. Then turn off the main switch
and store at room temperature.
How do I use R600 safely?
Please use R600 in its operating temperature range. Using R600 out of the optimal operating temperature
range may cause R600 to exceed its safe and effective working limits. DO NOT immerse R600 in water.
Doing so will void the warranty. R600 is not waterproofed. If R600 power electrical devices with
heating-elements (600W) over half hours, it is normal to appear over-temperature protection. Please wait
about 1 hour before using or charging.
Can it be upgraded?
The firmware can be upgraded when the machine can be optimized, and the parameters of the machine will
be adjusted and optimized. After the upgrade, the paper document will not be updated, and there will be no
additional instructions. Please refer to the Firmware upgrade instructions.
15
Power A Free Life