Solar Panel Connection - EcoFlow R600 User Manual

Solar Panel Connection

How to recharge the R600 using solar panels?
If you need to know more about the connection of solar panel, please refer to the Solar Panel User Guide. Here
we focus on demonstrate how one or two solar panel in parallel. The R600 can support a 10-25V DC input.
When the input exceeds 25V, the R600's overvoltage protection will be triggered. Over voltage may damage
the product. Users should follow these instructions. EcoFlow do not provide free repair services for any product
damage caused by connecting many solar panels to the product or incorrect connection, even during the
warranty period.
1. Recommend Charging Method
Users can connect a solar panel (do not connect more than one in series) as shown in Example 1. Connect to EF
MC4 to XT60 solar charge cable. Connect the XT60 connector to the R600's XT60 input to charge the device.
Users can connect up to 2 sets of solar panels in parallel to the MC4 port as shown in Example 2. If you want to
connect 2 pieces of solar panels, connect them with our solar MC4 parallel connection cable. Connect the XT60
connector to the R600's XT60 input to charge the device. The parallel connection cable is an optional accessory
that is purchased separately.
e.g.1
R600 Charging Port
XT60 Connector
e.g.2(Only supports parallel connection, not serial connection)
R600 Charging Port
XT60 Connector
MC4 Connector
R600
R600
Solar MC4 parallel connection cable
* Users need to buy the solar panels and related
SOLAR PANEL-21.6V X2
SOLAR PANEL-21.6V
parallel connection
accessories on their own.
Power A Free Life
10