Table of Contents
Advertisement
In summary, from the time a clock or repeater device is first powered on at its install Location and connects to the
mesh network, it receives and sets its time within 15 minutes. If a Bridge is in 8-hour deployment mode, a new device is
added to your OneVue account within 30 minutes, and when not in 8-hour deployment mode it may take up to 24 hours
to 7 days.
Battery-operated clock only: When a clock cannot establish a connection to a mesh network to receive time, its
estimated battery life is reduced to 90 days.
Post-install operation
Once a Bridge has connected to OneVue and the Bluetooth clocks and/or repeaters have authenticated and connected
to a Sync Bluetooth mesh network, the devices operate as described below.
1.
Once a day, at a system defined time, a Bridge connects to your facility's network to receive UTC time from a NTP
Server and check-in to OneVue to download device setting updates.
2.
Once a day, at a system defined time, each Sync Bluetooth device automatically establishes a wireless
communication path to either another device to build the Sync Bluetooth mesh network.
• Clock and repeater statuses are forwarded to a Bridge either by its communication path to another clock,
repeater or directly to a Bridge.
• Clocks and repeaters receive setting updates and synchronizes received UTC time to its Time Zone offset and
DST rules.
3.
Once the Sync Bluetooth mesh network has completed its daily build, a Bridge connects to your facility's network to
send all received device status data to OneVue.
Page 7
Advertisement
Table of Contents
