Digital Clock/Timer flush mount installation
A flush mount model can be installed onto a new or existing wall surface.
Supplied components
Quantity
Component
1
Flush mount junction box
Material: ABS plastic, color black, and UL Rated 94-V0
1
Bezel
Material: ABS plastic, color black, and UL Rated 94-V0)
4
#10 Phillips Flat Head Screw
4
Drywall Anchor
Dimension specifications
Clock Type
2.5" (6.4 cm) 6-
digit
Install flush mount clock/timer
1.
Mount the junction box.
• New wall surface
Mount junction box to wall studs using four common drywall screws (not supplied), as shown in Figure 1, "New
wall surface assembly illustration" [18].
Remove the applicable conduit knockout(s) for the incoming AC power (PoE optional: for AC backup power use
only) and the timer input for a timer model only. Do not remove knockouts that you will not be using.
Weight
Max. Current
Draw
2.0 lb (0.9 kg)
170 mA
Width (A)
Height (B)
16.8" (42.7 cm)
6.5" (16.5 cm)
Depth (C)
3.4" (8.6 cm)
Page 16