Connecting A Bta-2; Adapter) - Zoom PodTrak P4 Operation Manual

Connecting a BTA-2 (dedicated wireless adapter)
By connecting a BTA-2, audio can be input through the smartphone connection jack via Bluetooth.
Connecting
Pairing must be conducted the first time connecting.
1.
P4
While the power is off, connect the BTA-2 to the smartphone connection jack and the BTA-2 power
supply connector.
2.
P4
Turn the power on (
The LED lights white when power is being supplied to the BTA-2.
If a smartphone has already been paired, it will automatically be connected at this time.
3.
Press and hold the pairing switch until the BTA-2 LED blinks white.
This puts the BTA-2 into connection standby.
4.
Conduct connection procedures on the smartphone.
The LED will light blue when connection completes.
NOTE
When connecting to a smartphone using a BTA-2, set INPUT SELECT switch 3 to .
Disconnecting
1.
Conduct disconnection procedures on the smartphone.
This disconnects it.
2.
P4
The power should be off when disconnecting a BTA-2.
Pairing
switch
"Turning the power on" on page
LED
BTA-2
16).
21