Specifications - Zoom PodTrak P4 Operation Manual

Specifications

Number Number of input channels
of input
Number of output channels
and output
channels
Connectors MIC
Smartphone
connection jack
Headphones
USB
DC 5 V
Recorder Format
Recording media
Audio interface
Frequency response
Equivalent input noise
Display
Power supply
Estimated continuous operation time using batteries
Power consumption
External dimensions
Weight (unit only)
Note: 0 dBu = 0.775 V
4 (mono/stereo)
1 (headphone × 4)
Type XLR jack (2: HOT)
Input gain -∞ – +70 dB
Input impedance XLR: 3 kΩ
Maximum input 0 dBu (at 0 dBFS)
level
Phantom power +48 V
Type TRRS mini jack (4-contact; TIP: L, RING: R, RING: GND, SLEEVE: MIC)
Input impedance 3 kΩ
Maximum input +3 dBu
level
Type 3.5 mm stereo mini
Maximum output 20 mW + 20 mW (32 Ω load)
level
Output impedance 10 Ω
USB Type-C (audio interface and mass storage functions)
Note: Use a USB cable that supports data transfer. USB bus power is
supported.
USB Type-C (for power supply)
WAV 44.1 kHz, 16-bit, mono/stereo
4 GB – 32 GB SDHC-compliant cards (Class 10 or higher)
64 GB – 512 GB SDXC-compliant cards (Class 10 or higher)
44.1 kHz, 16-bit, 2-in/2-out
-1.0 dB: 20 Hz – 20 kHz (at 44.1 kHz sampling rate)
-124 dBu or less (IHF-A) with +70 dB/150 Ω input
LCD with backlight (96×64 resolution)
2 AA batteries (alkaline, nickel-metal hydride or lithium)
• We recommend nickel-metal hydride batteries for the P4.
AC adapter (ZOOM AD-17): DC 5 V/1 A (supports USB bus power)
Recording 44.1 kHz/16-bit 4ch audio to an SD card (+48 V OFF ,
headphones into 63 Ω load)
Alkaline batteries: about 4 hours
NiMH batteries (1900 mAh): about 4.5 hours
Lithium batteries: about 9 hours
• The above values are approximate.
• Continuous battery operation times were determined using in-house
testing methods. They will vary greatly according to use conditions.
5 W
112 mm (W) × 155 mm (D) × 47 mm (H)
290 g
56