Table of Contents
Advertisement
5.
Use
/
to select Full Test, and press
The amount of time required will be shown.
6.
Use
/
to select Execute, and press
The card performance test will start.
The result of the test will be shown when it completes.
If the access rate MAX reaches 100%, the card will fail (NG).
NOTE
Even if a performance test result is "Pass" , there is no guarantee that writing errors will not occur. This
information is just to provide guidance.
HINT
Press
to cancel a test while it is being executed.
.
.
48
Hide quick links:
Advertisement
Table of Contents
