Table of Contents

Advertisement

Available languages

Available languages

Use

After completion of installation, make sure to turn on the water intake valve and mixing
valve since there is no water in the inner chamber. Turn the mixing valve to the maximum
for hot water outlet. Turn off the out-flow valve when water flows out from the sprinkler or
the water outlet (indicating that the container is filled with water). Turn off the water outlet
valve. Inspect all connections to ensure that there is no water leakage before connecting to
power.
1.
Adjust the water temperature knob at the bottom of the water heater to set the
temperature.
The maximum water temperature setting is
75
C.
o
Temperature adjustment knob: Turn the knob
gradually clockwise to raise the temperature
setting. The knob will not continue to turn
once it reaches maximum temperature
setting. Turn it anticlockwise gradually to
reduce the temperature setting. Once the
minimum temperature setting is reached, the
water heater's power will be cut off if you
continue to turn the water temperature knob.
If the heating indicator light is lit, it means that the water heater is heating.
If the heating indicator light is off, it means that heating is complete and that the water
heating is on standby.
2.
Observe thermometer the current water
temperature.
Power will be automatically cut off when the water temperature reaches the set
temperature. Once it lowers to certain temperature power will be automatically
connected.
When the water pressure is≥0.80 MPa and the pressure relief hole on the safety valve
emits large volume of water, it means that the water pressure is excessive. In such case,
please notify the After-sales Department.
Things to note during use
Do not connect the power before filling the inner chamber with water in order to
1.
prevent damage to the water heater.
2.
Adjust the water temperature to the suitable level before use in order to prevent
scalding.
3.
As long as the hot water is adequate, set a lower temperature to reduce heat loss,
high temperature corrosion and scaling. This will extend the water heater's lifespan.
4.
Do not place inflammable substances such as petrol near the water heater, otherwise
it may cause fire.
5.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
6.
Children should be supervised to ensure that they do not play with the appliance.
Water temperature indicator
9
Heating indicator light
Water temperature knob

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Es50v-a3Es80v-a3Es100v-a3

Table of Contents