9.3. Connecting to the Remote Master Volume Control Terminal
You can remotely control the unit's volume level by connecting a volume controller.
To remotely control the volume level, adjust the unit's volume level with the master volume control knob in
advance. The level adjusted with the master volume control knob is the maximum volume level that you can
remotely control.
For cable wiring to the removable terminal plug, refer to p. 18.
Note
Never set the master volume control knob to the minimum position. If set to the minimum, no sound is output
even if you maximize the volume level through this terminal.
(See "VOLUME ADJUSTMENT" on p. 20.)
A-812D/824D/848D
Connectable volume controller: 10 kΩ B-taper potentiometer
9.4. Connecting to the Power Remote Control Output Terminal
Use this terminal when remotely controlling other equipment. This terminal is activated when the unit is turned
ON.
For cable wiring to the removable terminal plug, refer to p. 18.
A-812D/824D/848D
Output specifications: Open collector output, withstand voltage: 30 V DC or less, current: 25 mA or less
To other equipment's
remote control input terminal
15