Setting Notes; Options; Night-Mode; Setting Night-Mode - Timex IRONMAN Data Link USB User Manual

Timex Data Link USB Watch User Guide

Setting Notes

To set a note, turn the Crown to display either an existing note that you want to change or an
unused entry to create a new note. Pull out the Crown to enter setting mode. A cursor will flash
over the first character. Turn the Crown to choose the desired character. Press MODE to
advance to the next position, or STOP/RESET to return to a previous position. Press
START/SPLIT as a shortcut to enter a space. When you are done setting, press the Crown in.
Note that you may edit only as many characters as there were in the original message.
Messages may contain up to 100 characters.

Options

Three additional features – NIGHT-MODE, Chime, and Button Beep – are available through
the Options mode. When you enter this mode, the last feature viewed is displayed. Turn the
Crown to view the other two features.

NIGHT-MODE

When this feature is activated, the INDIGLO light is turned on whenever a button is pressed. It
can be set to OFF, ON, or AUTO. When turned ON, NIGHT-MODE is active for 8 hours.
AUTO activates NIGHT-MODE during preset times.

Setting NIGHT-MODE

From the display showing the current state of NIGHT-MODE, press either START/SPLIT or
STOP/RESET. The sequence of settings is OFF–AUTO–ON–AUTO–OFF. This allows you to
set the current state as either ON or OFF and also turn on AUTO, if desired. When NIGHT-
MODE is ON, its icon appears in the display, as shown.
22