Advertisement
TIMEX
Model No(s):
M916
Prepared by:
Reviewed by:
2.4 QUICK DATE SETTING
a. Pull the Crown to the SET 1 Position.
b. Rotate the Crown in either direction until current date is displayed.
c. Date numeral should increase or decrease depending on the Crown direction.
d. Push the Crown in to ZERO Position.
Note:
If above date setting occurs between 10 o'clock PM and 2 o'clock AM, the date numeral adjustment should only be in
the incremental direction.
2.5 NORMAL DATE SETTING
a. Pull the Crown to the SET 2 Position.
b. Rotate the Crown in clockwise direction until current date is displayed.
c. Push the Crown to ZERO Position.
Caution:
The CROWN must be returned to the ZERO Position after TIME-OF-DAY and/or DAY/DATE setting. Wearing or
storing the watch with the CROWN left in the SET 1 position will cause damage to its date mechanism.
2.6 INDIGLO ACTIVATION
This is applicable only on watch styles with the INDIGLO feature (M916).
Note:
Models with this feature usually have the word "INDIGLO" printed on the watch display area.
Due to technical limitation, there are products that will show a small unlighted area at 6 o'clock or
12'oclock location of the dial. This is not a defect.
a. Push the Crown inward. Watch display will illuminate with blue-green or blue light.
b. Releasing the Crown back to the ZERO Position will turn off the INDIGLO light.
M916 Watch Operation Guide
WATCH OPERATION GUIDE
TIMEX CONFIDENTIAL PROPRIETARY INFORMATION
Part Name:
GTajantajan/HSagun
ACCabasan
WATCH HEAD
Quality Control
Page 2 of 2
Doc. No./Rev.:
20170418
Approved by:
DGriffith
Doc. No./Rev. 20170418
Advertisement
