Take A Split; Stop The Chronograph; Restart The Chronograph; Store A Workout - Timex IRONMAN Data Link USB User Manual

Timex Data Link USB Watch User Guide

Take a Split

Press START/SPLIT to take a split, which means to stop timing one part of a workout (such as
a lap) and to start timing the next part. The display then freezes for 10 seconds, as shown, after
which it resumes with the next lap. Press MODE to immediately display the next lap timing.
After a split is taken, the lap number shows in the upper left part of the display.
There are four formats available for displaying lap and split times, as described here [see
Formats]. Note that you may continue to take splits, even after the watch's memory is filled. In
this case, the workout date is saved, along with as many of the first splits as will fit.

Stop the Chronograph

Press STOP/RESET to stop the chronograph at any time. The display will remain at whatever
lap and split times were reached at that point, as in the example.

Restart the Chronograph

Press START/SPLIT again to restart the chronograph. The times will resume from where they
were previously stopped.

Store a Workout

To store a completed workout, turn the Crown one click in either direction. A message will tell
you that the workout was stored, then the amount of free memory left (or MEMORY FULL, if
appropriate), followed by a return to the chronograph reset display.
8