RC-Plus DUO POWER 100 Instruction Manual page 12

USER SETTING
Definition of a safety timer
If a system failure fails to identify the capacity of an already
full battery, this safety delay may prevent the battery from
overcharging. The safety time should not be less than the
full charge time of the battery, usually between 10 and 720
minutes.
Capacity cut-off program
The capacity cut-off program sets the maximum load
capacity. If the charger cannot detect the peak voltage, this
program will automatically stop charging/discharging if you
have set the maximum charge capacity between 10mAh and
50000mAh.
Sound adjustment
Beeper on/off; Buzzer on/off.
Low input power cut-off
The DC input power is 19-26V, the program sets the lowest
cut-off input voltage value to 19V. If the voltage is lower than
the set voltage level, the program will stop automatically.
Loading the factory setting
Return to default setting
Software version
12