Product Certifications - Emerson Rosemount 5900S Quick Start Manual

Quick Start Guide
A

Product Certifications

Rev 7.15
A.1 European directive information
The most recent revision of the EU Declaration of Conformity can be found
at Emerson.com/Rosemount.
A.2 Ordinary Location Certification
As standard, the transmitter has been examined and tested to determine
that the design meets the basic electrical, mechanical, and fire protection
requirements by a nationally recognized test laboratory (NRTL) as accredited
by the Federal Occupational Safety and Health Administration (OSHA).
Complies with FM 3810:2005 and CSA: C22.2 No. 1010.1.
A.3 Telecommunication compliance
A.3.1 FCC
This device complies with Part 15C of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Certificate: K8C5900
A.3.2 IC
This device complies with RSS210-7.
Certificate: 2827A-5900
A.3.3 Radio Equipment Directive (RED)
This device complies with ETSI EN 302 372 and EN 62479. EU directive
2014/53/EU. The device shall be installed according to requrements ETSI EN
302372.
A.4 CE-mark
The product complies with applicable EU directives (EMC, ATEX, LVD, and
RED). Based on the low emitted effects from the gauges (below 0.1 mW)
compared to limits given by the Rec. 1999/519/EC, no additional measures
are needed.
38 Rosemount 5900S Radar Level Gauge
March 2020