Table of Contents
Advertisement
Product information
2.3
Intended use
The drop-arm awnings of type 310/314, 330, 340 and 350
are sun shading systems that may only be employed to
provide privacy and protect against summer heat and
glare. Inappropriate use may result in significant danger.
All awnings for external use are designed for a wind load
of 1.1 kN/m² (DIN 1055). The directive entitled "Wind
loads for construction of closures and awnings when re-
tracted – Section 5.1.1"
1
these products can be installed without requiring special
precautions.
Additional loads on the window awning in the form of
hanging objects could damage the product or cause it to
detach from the wall and are therefore not permitted.
The intended use also includes observing these instruc-
tions and the care and maintenance conditions.
2.4
Wind speed limits
Type of installation
Drop arm directly (standard
distance) on the facade
Drop arm 300 – 1,000 mm in
front of facade
Drop arm in reveal
Tab. 2:
Wind speed limits for drop-arm awnings (data in
m/s and Beaufort level)
1
Published by the Bundesverband Rollladen + Son-
nenschutz e.V. and ITRS Industrieverband techni-
sche Textilien Rollladen Sonnenschutz e. V.
[B866589_3] - EN / 05.04.12
defines the positions at which
Wind speed limits
7.5 – 10.4 m/s
(5 Bft)
3.5 – 5.4 m/s
(3 Bft)
7.5 – 10.4 m/s
(5 Bft)
Page 6 of 16
2.5
EC conformity
The EC conformity is certified, and the corresponding EC
declaration of conformity (see Chapter 9/p. 15) is part of
these product-specific operating and maintenance instruc-
tions. In order to maintain this condition and ensure safe
operation, you as the operator are obliged to observe the
instructions for use and maintenance.
Name:
WAREMA Renkhoff SE
Year of declaration of conformity:
Head office: Hans-Wilhelm-Renkhoff-Straße 2
97828 Marktheidenfeld
Germany
Standard:
DIN EN 13561
Product:
Awning
Intended use
Wind class:
Noise emission level
3
:
2
The products meet the requirements of the stated
wind class. The products have been statically tested
according to DIN EN 1932. The product resists wind
loads up to 13.4 m/s (see wind speed limits Tab. 2).
The wind speed of 10.4 m/s corresponds to Beau-
fort number 5 and is defined as a fresh wind or
breeze, i.e. small deciduous trees begin to sway,
white caps form on lakes.
3
In a standard installation of the product on a test
stand, the noise emission level is <70 dB(A). This
value may vary depending on the installation.
2006
For outdoor installation
2
3
< 70 dB (A)
Subject to change without notice.
Advertisement
Table of Contents
