Ec Declaration Of Conformity - WAREMA 310 Instructions For Use And Maintenance Manual

9

EC Declaration of Conformity

EC Declaration of Conformity
The product:
WAREMA drop-arm awning
Type: 310, 314, 330, 340, 350
Purpose:
Meets all pertinent provisions of the Construction Products Directive 89/106/EEC and, in the case of motor
drives, the provisions of Machinery Directive 2006/42/EC.
In particular, the following harmonised standards were used:
DIN EN 13561
Additionally for motor drive.
DIN EN 60335-2-97
The safety objectives of Low Voltage Directive 2006/95/EC were guaranteed according to Appendix I No. 1.5.1.
of Directive 2006/42/EC.
Person in charge of the compilation of the technical documents: Ralf Simon, for address, see manufacturer.
Manufacturer:
Harald Freund
Executive Vice President Operations
Marktheidenfeld, June 2011
[B866589_3] - EN / 05.04.12
External textile sun shading system
External blinds - Performance requirements including safety.
Household and similar electrical appliances - Safety - Part 2-97: Particular re-
quirements for drives for rolling shutters, awnings, blinds and similar equipment
WAREMA Renkhoff SE
Hans-Wilhelm-Renkhoff-Str. 2
97828 Marktheidenfeld
Germany
Ralf Simon
Head of Research and Development
Page 15 of 16
EC Declaration of Conformity
Subject to change without notice.