Product Information; Parts Description; Technical Data/Accessories - WAREMA 310 Instructions For Use And Maintenance Manual

2

Product information

2.1

Parts description

Drop-arm awning
type 310/314
Drop-arm awning
type 340
1 Fabric shaft console
2 Drop arm
3 Drop profile
Fig. 1: Parts overview of drop-arm awnings
[B866589_3] - EN / 05.04.12
Drop-arm awning
type 330
Drop-arm awning
type 350
4 Fabric
5 Box
6 Clamping support
(type 314 only)
Page 5 of 16
Product information
2.2

Technical data/accessories

Details for electric drive
Parameter
Rated torque
Revolutions (idling)
Mains voltage
Current consumption
Power
Degree of protection
Safety class
Short-term operation (S2)
Limit switch range
Tab. 1: Electric drive data (overview)

NOTE
Tab. 1 is a summary of the data for the motors that
can be used with this product. For specific infor-
mation, refer to the setting instructions included for
the motor.
Accessories
A wide range of control devices is available for our sun
shading control systems to give you optimum control of
the product.
Do not use the awnings in icy or frosty weather. The awn-
ings must be cleared of ice and snow before they can be
used. Liability cannot be accepted for damage to the sun
shading system resulting from the operation under icy
conditions. We recommend the use of an ice monitoring
system.
Value
8 ─ 30 Nm
17 rpm
230 V AC/50 Hz
0.45 ─ 0.9 A
100 ─ 205 W
IP 44
I
Approx. 4 minutes
64 revolutions
Subject to change without notice.