Discover The Stg Using Waveware Discover And Reset Tool - WaveWare STG Manual

Discover the STG Using WaveWare Discover and Reset Tool

The WaveWare Discover and Reset Tool is designed to make it simple to install and configure an STG.
Simply connect the STG to your LAN, then run the Discover and Reset Tool's Discovery function to
discover the STG on the LAN.
You can download the WaveWare Discover and Reset tool at the following link:
http://www.wirelessmessaging.com/software/misc/discover_reset_setup.exe
Install the Discover and Reset Tool. Note: WaveWare Discover and Reset Tool requires Microsoft .NET
runtime files to be installed on the PC that will be used to run the app.
Connect a Windows PC running the WaveWare Discover and Reset Tool to the LAN that the STG is
connected to. Launch the Discovery function to open the Discover WaveWare Systems screen. Click on
the Discover button (magnifying glass icon) to start the discovery process. Any STGs and WaveWare
systems on the LAN should appear in the list within a second or two. Click on the displayed record of a
discovered STG to launch the default browser and to pull up the STG configuration page.