Ir Transmitter; Range; Optional Accessories; Technical Specifications - Marmitek Powermid XL User Manual

5.2

IR Transmitter

4. Place the IR Transmitter in the room/area in which the A/V equipment you wish to
operate is located.
5. Point the front of the IR Transmitter (with Marmitek logo) towards the equipment
you wish to operate.
6. Connect the Power Adapter to the IR Transmitter and insert this into the socket.
5.3

Range

Range between Transmitter and Receiver depends on:
• The number of floors and walls through which the signal has to travel and the
materials used.
• Other 433 MHz sources such as wireless headphones or wireless speakers can
significantly limit the range of the Powermid XL™. The best result is obtained if
these sources are switched off when using the Powermid XL™. The Powermid
XL™ works fine with wireless telephones.
• Some satellite receivers must be placed closer to the Powermid XL™ as a result
of the effect the two devices have on one another. Try the Transmitter at a range
of locations in order to obtain the best range.

6 Optional accessories

IR Eye 2 (Art. Nr. 08174)
The IR Eye extends the IR signal of your remote control in combination with the
Powermid XL™. Using the infrared extender, you can operate your A/V equipment
even when it is in a closed cupboard, out of sight or in another room.
For more information, checkout www.marmitek.com
Powermid XL Extra IR receiver (Art. nr. 08902 / 09492)
With the help of an extra IR Receiver you can also control your A/V equipment from
another place.
Powermid XL Extra IR transmitter (Art. nr. 08903 / 09493)
With the help of an extra IR transmitter you can also control your A/V equipment from
another place.

7 Technical specifications

Range
Power
Frequency
Dimensions
Frequency range
IR reception range
Powermid XL™
Up to 100 m free field, up to 25 m through walls and
ceilings
100 - 240 V AC 50/60 Hz
433.92 MHz
75x80x200 mm (with upright antenna)
30-60 KHz.
± 6 metres
5