Ametek Solartron Metrology Wigauge WHT User And Installation Manual page 12

5.0 Operating Modes
5.5.1 Wireless Hand Tool Manager Operating Modes
The WHT Manager provides the user with a simple way to set up tools, log data, save their settings and observe the readings as they come in. For further
details see the WHT Manager Documentation provided with the WHT on the CD.
5.5.2 Indications
The WHT can provide both visual and audible indications to the operator. Some of these indications can be switched On or Off using the Controller Soft-
ware. The table below summarizes the indications.
LED
LED 1
(nearest battery
LED 2
LED 3
LED 4
5:0 Operating Modes
Colour Indication
Green In Limits
Red Out of Limits
Red Battery Status
Blue Power and
Bluetooth Status
Programmable
ON or OFF
ON or OFF
Not
Programmable
Not
Programmable
12
Function
Green for 3 seconds when button pushed
and measurement in limit
Red for 3 seconds when button pushed
and measurement in limit
OFF - Battery OK
Slow Flash - Battery Low Warning
Fast Flash - Battery requires charging
(measurements disabled)
OFF - No Power
ON - Power ON
FLASHING - Bluetooth Connection
502848 Issue 5