Button Allocation - Ametek Solartron Metrology Wigauge WHT User And Installation Manual

5.0 Operating Modes

5.4 Button Allocation

Either button can be programmed to operate when pressed to perform the functions below.
5.4.1 Transmit a Tagged Reading
Send the current measurement each time the button is pressed or tag the current measurement if in streaming mode.
5.4.2 Zero
Force the current measurement to Zero.
5.4.3 Preset
Force the current measurement to a Preset value.
5.4.4 Advanced
Allows the WHT measurement mode to be changed using the WHT buttons.
5.4.5 Display
LCD which shows current measurement and limits can be orientated via serial command on WHT manager software.
5:0 Operating Modes
10
502848 Issue 5