Distance To Combustible Material; Operational Control - Nordpeis Q-23FL User Manual

3. Distance to combustible material

Firewall
(FIG 1).
When connecting a steel chimney to the top outlet use
the security distances required by the manufacturer.
material, such as linoleum, carpets etc. must be
The insert expands when in use, and for this
reason the surround must NEVER rest on the
insert must neither rest on the bench plate
Before the insert is removed from the pallet, remove the
accessories in the combustion chamber. To acess the
combustion chamber, do as follows:
1. Loosen the transport safety from the counterweight
and loosen the screw fastening the transport safety to
the product. Push the transport safety away from the
counterweight FIG 3A.
2. Make sure both wires are in place before opening the
door FIG 3B
3. Remove alle loose accessories from the combustion
chamber. Use the list of contents to make sure all parts
are included. Before lifting the product of the pallet,
secure the counterweight with the transport safety.
4. The insert is placed on two rails on top of the pallet.
In order to remove it from the rails and pallet, loosen
the screws and remove the brackets holding it in place.
Before lifting the insert of the pallet, fasten the screws
removed from the legs FIG 2.

Operational control

When the insert is in an upright position, and prior to
functions are easy to use and appear satisfactory.
, check that all
1. Adjust the legs. Make sure the insert is level.
2. Loosen the transport safety. Make sure the
wires holding the door are in place.
3. Make sure the door can be opened and closed
properly.
If the insert is connected to the smokepipe
sideways, attach the small radiation shield around the
pulley closest to the smokepipe.
A
Left position = closed
Right position = open
To make the door self closing, do as follows;
holding the weights in place outwards FIG 4(A)
3. Carefully push the clamps back in place.
If it becomes necessary to clean the glass, pull out the
two small handles above the door to keep it in place
FIG 5A. Pull out the lock handle on the left side of the
lock the handle on the left side of the door before
pushing the two small handles back in place.
Radiation shields, rear and around smoke collar.
separate shield around the smoke collar(FIG 6-7). To
utilize the rear or side connection, remove the cut in
the radiation shield. To keep the smoke collar radia-
tion shield in place, push the upper and lower cuts in
towards the smokepipe
GB
B
Fully to the right
19