Inspection And Maintenance; Repair; Marking - Eaton Crouse-Hinds MTL F300 Series Instruction Manual

8
8 .3

Inspection and maintenance

a) Inspection and maintenance should be carried out in accordance with European,
national and local regulations which may refer to the standard EN 60079-17 . In
addition specific industries or end users may have specific requirements which
should also be met.
b) Access to the internal circuitry must not be made during operation.
8 .4

Repair

This product cannot be repaired by the user and must be replaced with an equivalent
certified product.
.
8 .5

Marking

Each device is marked in compliance with the Directive.
This information applies to products manufactured during or after the year 2011.
Typical certification marking
For F3xx
Made in the UK
For F3xx-V2
F3xx-V2 and F97
For details of FM and IECEx approvals see Sections 9 & 10.
F3xx and F97 -50C≤Tamb≤70C
II 3 G
Ex nA IIC T4 Gc
Ex ec IIC T4 Gc
Ex nA [ic] IIC T4 Gc
Ex ec [ic] IIC T4 Gc
FISCO Ex ic IIC T4 Gc
RELC11ATEX1010X
Relcom Inc. Forest Grove, OR USA
-50C≤Tamb≤70C
II 3 G
Ex nA IIC T4 Gc
Ex ec IIC T4 Gc
FISCO Ex ic IIC T4 Gc
RELC11ATEX1010X
Made in the UK Relcom Inc. Forest Grove, OR USA
NOTE
XXXXXXXXXX YY
XXXXXXXXXX YY
INM F300 rev 7