Sigma PE 7.5 Instruction Book page 6

9.0) HOW TO WORK WITH THE MACHINE : THE CONTROL PANEL
H
I
G
How to start the mixer:
•
Press the main button in position I.
•
Insert the tool.
•
Insert the bowl.
•
Lift the bowl
•
Rotate the protection grid in the close position.
•
Press one of the buttons with the digits to select the speed, the mixer will start to work.
• 9.1) OPERATIVE RUNNING: Press the main switch F (see the exploded view from
position O to position I. Lamp A will light. Press button 1, (or another one of the
buttons if you already know the working speed) the tool will start to rotate at the
minimum speed, by pressing the buttons 2, 3 and the following till numberl 6 the
speed will increase till the highest one. By pressing together the couple of buttons
B, the speed gradually increases till the highest one. By pressing together the
couple of buttons C, the speed gradually decreases till the lowest one. By
watching the indicator F you can see the absorbed current of the mixer. Pay
attention not to exceed the power of absorbtion indicated in the rating plate.
9.2) END OF WORK: To remove the dough when the tool is still, rotate the grid; lower the
bowl with the lifting lever and rotate the tool anticlockwise to unlock it. Free the bowl from
the safety handles and take the bowl with the tool out.
Remind to switch the main switch off.
9.3) TOOLS AND THEIR USE.
Spiral: use it for hard dough,
• Pizza or bread dough
• Cake and croissant dough etc.
• Cream puff dough
• Meat, mashed potatoes etc
Tool rpm:minimum speed Position: 1÷2
lowest while speed 6 is the highest.
A
B) Couple of buttons, by pushing them
together you can increase the selected
B
speed till the maximum of the rpm.
C) Couple of buttons, by pushing them
C
together you can decrease the selected
+
1 2
_
speed till the minumum of the rpm.
3 4
S
5 T 6
D Couple of buttons, by pushing them,
O
P
together you stop the mixer.
D
E) Main switch.
F) Indicator. It shows the absorbed
E
current of the mixer .
G) Regulation feet.
F
H) Protection grid with safety
microswitch.
I) Bowl lifting lever.
Whisk::use it to mount the softest
ingredients
• Albumen
• Biscuits.
• Meringues
• Whipped cream.
DO NOT USE FOR HARD DOUGH
Tool rpm: from medioum to max
Position: 3÷4÷5÷6
A) Main switch led.
By pushing the buttons with
the digits you make rotate
the tool at the selected
speed , speed 1 is the
6