Table of Contents
Advertisement
7) INSTALLATION
The machine must be placed on a solid working table or on a basement.
Next to the machine a lead must be installed wires section of 1,5 mm 2 at
least and tap with blocked plug.
Make sure that volt, Hz, kw comply with the ones indicated on the rating plate
of the machine.
ATTENTION: At the start of the power supply a differential must be fitted with leakage
current of 0,03A (Ampere).
DO NOT REMOVE OR TAMPER PROTECTIOND AND SAFETY DEVICES, EITHER
ELECTRIC OR MECHANIC, THE MACHINE IS EQUIPPED WITH.
8.1)1. The bowl must be attached to the
mixer BEFORE attaching the tools.
Make sure that the bowl lift lever is in
the down position. Place the bowl onto
the mixer making sure that the holes
on each side are securely placed over
the pins. Rotate the bowl clockwise.
Insert the bowl pins in the
lifting arch and rotate anti-
clockwise.
8.2)
Complete the operation by blocking the
bowl with the handle.
8.0) OPERATING INSTRUCTIONS
The machine must have the bowl attached and the
protection grid closed otherwise the protections and
safety devices prevent the machine from working.
Block the bowl with
the handle
4
Advertisement
Table of Contents
