Advertisement
Massaging (WHOLE BODY SENSOR AUTOMATIC COURSES)
Course selection of FULL AUTO
Automatic massages based on the degrees of stress and stiffness measured by whole body
sensors prior to massaging.
Press the FULL AUTO button.
Stress is measured.
Press the AGE button corresponding to your age.
Grip the sensor controller with your fingers (with both hands) so that four sensors are
touched.
Rear of sensor controller
Stiffness is measured.
Grip the sensor controller with
your fingers (with one hand) so
that three sensors are touched.
Measure the position of shoulder.
Sensor massaging will start.
Massage according to detected stress and stiffness.
The STRESS indicator disappears.
Course selection of STIFFNESS/RECOVERY/RELAX/QUICK
Massaging using a whole body Sensor automatic course program based on the degree of
stiffness detected by sensors.
Press the STIFFNESS,RECOVERY,RELAX or QUICK buttons.
Stiffness is measured.
Grip the sensor controller with
your fingers (with one hand) so
that three sensors are touched.
Measure the position of shoulder.
Sensor massaging will start.
Massage according to detected stiffness.
*Keep calm during stress measurement.
Detection
When stress measurement is completed
The measured degree
of stress is displayed
on the remote control
display.
and
icons flash (a beep sounds)
in turn. And stiffness measurement will start.
Rear of sensor controller
Detection
Rear of sensor controller
Detection
- 11 -
HEC-DR8700
Advertisement
