Meat Probe - Zanussi ZBM 890 Instruction Booklet

Meat Probe

The meat probe is a feature which will control the
cooking of meat by informing you of the exact tem-
perature at the centre of the meat. It is not necessary
to weigh the meat, the sensor determines the cooking
time. The cooking time will be influenced by the
cooking temperature.
The probe consists of a skewer like sensor at one end
of a heat resistant cable, and a plug at the other end.
Only use the meat probe supplied with the
oven or an original spare part.
1) First raise the meat probe socket cover (1),
which is located in the top of the left hand
side of the oven and plug the probe
connecting pin into its socket (2).
2) Insert the probe sensor into the centre of the
meat, taking care to avoid touching any
bone or pockets of fat as this will give a fal-
se temperature reading.
3) Place the meat, in a suitable tin, into the
oven cavity.
4) To select the Meat Probe function press the
"Probe Temp." button. The display will
show the pre-set temperature of 60 C and
the C symbol will flash for about 8 seconds.
5) Then select the finished internal meat tem-
perature by pressing buttons
the recommended temperatures in the
roasting chart for meat probe function.
6) Select the required cooking function by
pressing button 8.
Not all the cooking functions allow the use of
i
the probe (see next page). If you have selected
an incorrect function, the probe symbol will
flash red. For a correct function, the symbol
will flash white.
7) The probe will then continue to register the
internal meat temperature throughout the
cooking period and convey the information
to the programmer. The programmer will
give a visual read-out as cooking continues,
and switch off the oven when the selected
temperature has been reached.
8) Press the "OFF" button to turn the oven off.
9) Open the oven door and remove the probe
from the meat, then remove the probe from
the socket.
As poultry is a difficult shape with a great deal
i
of bone it is difficult to register a correct finish
temperature. Please ensure it is cooked
thoroughly.
Do not submerge the meat probe in water,
just wipe with a clean damp cloth.
+ -
or . Check
1
CHILD
SAFETY OFF ON
Roasting Chart -Meat probe Function
Type of meat Internal Temperatures
Pork Well done
Lamb Medium
Well done
Beef Rare
Medium
Well done
Chicken Well done
The temperatures quoted above are given as a guide only.
Remove the meat probe after use.
Do not leave the meat probe in the oven
when cooking other items.
If the oven has just been previously used
i
and the interior is hot, it may not be
possible to use the meat probe. In that
case, upon selection of the Meat Probe
function the symbol
Remove the meat probe from the oven and
after a few minutes the Technical assistance
symbol will disappear. You can either cook
the meat without the probe or wait until the
interior temperature of the oven has
dropped down to 60 C.
2
PROBE COOK STOP MINUTE
TEMP. TIME TIME MINDER
80 C
70 C
80 C
60 C
70 C
80 C
82 C
will come on.
11