Table of Contents
Advertisement
Oven Cavity
The enamelled back panel and the base of the oven
cavity are best cleaned whilst the oven is still warm.
Wipe the oven over with a soft cloth soaked in warm
soapy water after each use. From time to time it will
be necessary to do a more thorough cleaning, using a
proprietary oven cleaner.
Oven Shelves and Shelf Supports
To clean the oven shelves and the shelf supports,
soak in warm soapy water and remove stubborn
marks with a well wetted soap impregnated pad.
Rinse well and dry with a soft cloth.
The shelf supports can be removed for easy cleaning
(see diagram). Please, ensure the retaining nuts are
secure when refitting the shelf support.
Grease Filter
To prevent a build-up of fats on the fan impellor, the
grease filter must be fitted by clipping it over the
vents in the back panel. Do not use abrasive materials
to clean the seal. The grease filter is dishwasher
proof.
To clean the grease filter
When cooking is completed and the oven has cooled
down, remove the filter by pushing the protruding
tongue on the filter upward, and wash carefully.
Remember to refit the filter before using the oven
again.
Replacing The Oven Light
If the oven bulb needs replacing, it must comply with
the following specifications:
- Electric power: 15W,
- Electric rate: 220-240 V (50 Hz),
- Resistant to temperatures of 300 C,
- Connection type: E14.
These bulbs are available from your local Zanussi
Force Service Centre.
To replace the faulty bulb:
1. Ensure the oven is isolated from the electrical
supply.
2. Push in and turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace with the new
one.
4. Refit the glass cover.
5. Restore the electrical supply.
FO 0018
FO 0287
19
Advertisement
Table of Contents
