Table of Contents
Advertisement
Technical Data
DIMENSIONS
Height
OF RECESS
Width
Depth
DIMENSIONS
Height
OF THE
Width
OVEN CAVITY
Depth
Oven capacity
Electrical Connection
We strongly recommend that all operations
for the installation of your cooker be carried
out by QUALIFIED PERSONNEL to the
relevant British Standards.
The oven is designed to be connected to 240V (50Hz)
electricity supply.
The oven has an easily accessible terminal block
which is marked as follows:
Letter L
-
Live terminal
Letter N
-
Neutral terminal
-
Earth terminal
THIS APPLIANCE MUST BE EARTHED
The cable used to connect the oven to the electrical
supply must comply to the specifications given
below.
For Uk use only
Models
Rating
section mm
Type of the cable
ZBC 748 2870 W
For Europe use only
Models
Rating
section mm
Type of the cable
ZBC 748 2870 W
24
580 mm.
560-570 mm.
550 mm.
320 mm.
420 mm.
390 mm.
53.2 litres
Cable cross
Fuse
2
and
min.
2
6 mm
6242 Y
15 A
Cable cross
Fuse
2
and
min.
2
2,5 mm
Ho5 RR-F
13 A
Heating elements rating
Oven element
Grill element
Double Grill element
Convenction Fan
Oven Light
Cooling Fan
Total Rating
It is necessary that you install a double pole switch
between the appliance and the electricity supply
(mains), with a minimum gap of 3mm between the
switch contacts and of a type suitable for the required
load in compliance with the current rules.
The switch must not break the yellow and green earth
cable at any point.
Important
After installation and connecting, the cable must be
placed so that it cannot at any point reach a
temperature of more than 50 C above the ambient
temperature.
Before the appliance is connected, check that the
main fuse and the domestic installation can support
the load; and that the power supply is properly
earthed.
The manufacturer disclaims any responsibility should
these safety measures not be carried out.
2.5 kW
1.8 kW
2.8 kW
30 W
15 W
25 W
2.870 kW
Advertisement
Table of Contents
