Channel Layout - Layout Presets - RME Audio HDSPe AIO Pro User Manual

20.5.3 Channel Layout - Layout Presets

To maintain overview within TotalMix FX channels can be hidden. Channels can also be exclud-
ed from being remoted. Under Options / Channel Layout a dialog lists all I/Os with their current
state. Selecting one or several channels enables the options to the right:
 Hide Channel in Mixer/Matrix. The selected channels are no longer shown in TotalMix FX,
nor are they available via MIDI or OSC remote control.
 Hide Channel in MIDI Remote 1-4. The selected channels are hidden for MIDI remote (CC
and Mackie Protocol).
 Hide Channel in OSC Remote 1-4. The selected channels are hidden for OSC remote
control.
Hidden channels in Mixer/Matrix are still fully functional. An existing routing/mixing/FX pro-
cessing stays active. But as the channel is no longer visible it can not be edited anymore. At the
same time the hidden channels are removed from the list of remote controllable channels, to
prevent them from being edited unnoticed.
Hidden channels in MIDI Remote x are removed from the list of remote controllable channels.
Within an 8-channel block of a Mackie compatible control they are skipped. The control there-
fore is no longer bound to consecutive orders. For example it will control channels 1, 2, and 5 to
10, when channels 3 and 4 are hidden.
The same can be done for OSC. With unnecessary channels made invisible for the OSC remote
the more important channels are available as one block on the remote.
The dialog can be called directly from TotalMix by a right mouse click on any channel. The cor-
responding channel will then be preselected in the dialog.
In the above example ADAT channels have been made invisible. When ADAT is not used this is
an easy way to remove them from the mixer completely.
Rows Inputs, Playbacks and Outputs are set up individually by the tabs at the top. A double click
onto any line opens the edit field for the Name (User) column. Editing channel names in this
dialog is quick, Enter jumps to the next line. The names of the channels in the Control Room
section can only be changed this way.
50
User's Guide HDSPe AIO Pro © RME