14. Configuring the HDSPe AIO Pro
14.1 Settings Dialog
Configuring the HDSPe AIO Pro is done via its own settings dialog the app HDSPe Settings.
The mixer of the HDSPe AIO Pro, TotalMix FX, can be opened by starting the app Totalmix.
The HDSPe's hardware offers a number of helpful, well thought-of practical functions and op-
tions which affect how the card operates - it can be configured to suit many different require-
ments. The following is available in the 'Settings' dialog:
Level of analog I/Os
Configuration of digital I/Os
Synchronization behaviour
State of input and output
Current sample rate
Any changes performed in the
Settings dialog are applied im-
mediately - confirmation (e.g. by
exiting the dialog) is not re-
quired.
However, settings should not be
changed during playback or
record, as this can cause un-
wanted noises.
Use
the drop down menu
Properties For to select the
unit to be configured.
Use the tab About to see the
current driver version and firm-
ware version of the card.
Sample Rate
Used to set the current sample rate. This is the same setting as in the Audio MIDI Setup, just
added here for your convenience.
Input Level
Choice of the analog reference level for full level (0 dBFS), and therefore the sensitivity of the
analog Line input.
Output Level
Choice of the analog reference level for 0 dBFS and therefore the level at the analog Line out-
put.
Analog I/O (Breakout cable)
Choose the setting that equals the breakout cable currently in use. A wrong setting will cause
incorrect reference levels.
SPDIF In
Defines the input for the SPDIF signal. 'Optical' relates to the optical TOSLINK input, 'Coaxial' to
the RCA socket, 'Internal' to the jumper SPDIF IN.
User's Guide HDSPe AIO Pro © RME
27