20.6 Preferences
The dialog Preferences can be opened via the Options menu or directly via F2.
Level Meters
Full scale samples for OVR. Number
of consecutive samples to trigger an
over detection (1 to 10).
Peak Hold Time. Hold time of the peak
value. Adjustable from 0.1 up to 9.9 s.
RMS +3 dB. Shifts the RMS value by +3
dB, so that full scale level is identical for
Peak and RMS at 0 dBFS.
Mixer Views
FX Send follows highest Submix.
FX Send follows Main Out. Not availa-
ble for the AIO Pro - no FX.
Center Balance/Pan when changing
Mono/Stereo. When switching a stereo
channel into two mono channels the
pan-pots are set fully left and right. This
option will set them to center instead.
Disable double click fader action.
Prevents unintentional gain settings, for
example when using sensitive touch-
pads.
Store channel open/close in Layout
Preset. Also loads the state of the
channel panels (Settings/EQ Panel).
Dynamic Meters
Not available for the AIO Pro.
Snapshots
Do
not
load
Main/Phones Volumes, Control Room
Settings. The selected values stored in
the Snapshot are not loaded, so the cur-
rent setting is not changed.
Device Handling
Always init DSP devices with TotalMix FX settings. Not available for internal cards. On
boot TotalMix FX will always load the latest settings into the card.
Count MADI Channels per port. Not available for the AIO Pro.
Disable ASIO Direct Monitoring. Disables ASIO Direct Monitoring (ADM) for the HDSPe
AIO Pro within TotalMix FX.
52
-
Main
Volume,
User's Guide HDSPe AIO Pro © RME