Cable Specifications - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Dual-Row
Aisle Containment, 208 V)

3.2.7 Cable Specifications



Table 3-4
protected by a protective tube when connecting the power cables and the external signal
cables.
Table 3-4 Cable specifications
Applicatio
n Scenario
Indoor unit
Issue 01 (2017-07-30)
 Install a support every 1500 mm in straight sections of pipes, and 500 mm away from each bending
point in turning sections.
The onsite ground resistance must be less than 0.1 Ω.
The fireproof level of the cable must be at least VB.
lists specifications of power cables and cables to the host. The cables must be
Name
Power
cable
(optiona
l)
M6/OT
terminal
s of
indoor
unit
power
cable
Cord
end
terminal
of
indoor
unit
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Technical Specifications
Active Electrical power cable, 600
route with V, ZA-RVV, 5 x 10 mm
heating and black (five core wires: red,
humidificati yellow, green, blue, black),
on 57 A, outdoor cable, CE
Standby or Electrical power cable, 600
without V, ZA-RVV, 5 x 6 mm
heating or black (five core wires: red,
humidificati yellow, green, blue, black),
on 46 A, outdoor cable, CE, 32
A
Active Naked Crimping Terminal,
route with OT, 10 mm
heating and Plating, Naked Ring
humidificati Terminal
on
Standby or Naked Crimping Terminal,
without OT, 6 mm
heating or Insulated Ring Terminal,
humidificati 12-10 AWG, yellow
on
Active Common Terminal,Single
route with Cord End Terminal,
heating and Conductor Cross Section 10
2
humidificati mm , Length 22 mm, 50 A,
on Insertion Depth 12 mm,
Ivory
3 Hardware Installation Preparations
Description
The length is
2
, determined in
presale survey.

2 
,
Delivered with
2
, M6, Tin the accessories
2
, M6, Tin Plating,
Dual-route
power supply:
2 PCS
Single-route
power supply:
1 PCS
38