Set The Scale; To Change The Set-Point - Delmhorst C-2000 Owner's Manual

TO SET THE SCALE
Set the scale for #1 Lint Cotton or # 2 Seed Cotton.
hTo change the scale, press the scale button
will display the current scale for one second.
hPress and hold the scale button
two scales.
hRelease the scale key
Changing the scale will automatically reset the set-point value
to the default setting for that particular scale. Default settings
are as follows:

TO CHANGE THE SET-POINT

hTo change the set-point value press the set-point button
The meter will display the current set-point value for the
scale you have chosen for one second.
hTo scroll forward to a higher value for that scale hold the
set-point button
and scroll to the set-point value desired.
hTo scroll backward through the set-point values, press and
release the set-point button
and hold the scale button
$
button
hWhen scrolling in either direction, release the button to
stop at your desired set-point.
hA buzzer sounds if the meter reads a %MC higher than the
set-point.
4
$
Lint Cotton – 7%
Seed Cotton – 12%
#
while the current set-point is displayed
and the set-point will decrease.
$
to toggle between the
to stop at the desired scale.
#
. Within one second, press
$
. Continue to hold the scale
$
. The meter
#
.