Configuration - WIKA GD-20 Series Operating Instructions Manual

5. Commissioning, operation
Model GD-20
Register Measurand
00058 Pressure standar-
dised to 20 °C [68 °F]
00060 Pressure standar-
dised to 20 °C [68 °F]
00062 Pressure standar-
dised to 20 °C [68 °F]
00090 Pressure standar-
dised to 20 °C [68 °F]
00092 Pressure standar-
dised to 20 °C [68 °F]
Pressure standar-
00094
dised to 20 °C [68 °F]
00096 Pressure standar-
dised to 20 °C [68 °F]
00300 Pressure (gauge)
00302 Pressure (gauge)
00304 Pressure (gauge)
00306 Pressure (gauge)
00308 Pressure (gauge)
00310 Pressure (gauge)
00312 Pressure standar-
dised to 20 °C [68 °F]
00314 Pressure standar-
dised to 20 °C [68 °F]
00316 Pressure standar-
dised to 20 °C [68 °F]
00318 Pressure standar-
dised to 20 °C [68 °F]
The data is available as 32-bit floating-point number (low word first) per IEEE single-
precision 32-bit floating-point type, IEEE 754-1985.

5.4.2.6 Configuration

Cross-check the as-delivered condition of the configuration with the delivery note. The
factory-set configuration may differ from the standard described here.
WIKA operating instructions gas density sensor, model GD-20
Unit Based on
p20 bar Gauge pressure at 20 °C [68 °F] based
(gauge on 1,013 mbar
pressure)
p20 MPa Absolute pressure at 20 °C [68 °F]
p20 MPa Gauge pressure at 20 °C [68 °F] based
(gauge on 0.1013 MPa
pressure)
p20 kPa Absolute pressure at 20 °C [68 °F]
p20 kPa Gauge pressure at 20 °C [68 °F] based
on 1,013 mbar
p20 psi Absolute pressure at 20 °C [68 °F]
p20 psi Gauge pressure at 20 °C [68 °F] based
on 1,013 mbar
p bar Gauge pressure based on 1,013 mbar
p MPa Gauge pressure based on 1,013 mbar
p Pa Gauge pressure based on 1,013 mbar
p kPa Gauge pressure based on 1,013 mbar
p Psi Gauge pressure based on 1,013 mbar
p N/cm Gauge pressure based on 1,013 mbar
2
p20 Pa Absolute pressure at 20 °C [68 °F]
p20 Pa Gauge pressure at 20 °C [68 °F] based
on 1,013 mbar
p20 N/cm Absolute pressure at 20 °C [68 °F]
2
p20 N/cm2 Gauge pressure at 20 °C [68 °F] based
on 1,013 mbar
EN
21