Table of Contents
Advertisement
CLEANING & CARE
Caution: Ensure the pump is unplugged before beginning spa maintenance to avoid risk of
injury or death.
Adding air: Your spa will require additional air to be added from time to time. Changes in
temperature from day to night will change the pressure in the spa and may cause a certain
amount of deflation. Please follow the assembly instructions and inflate to the accurate
pressure needed.
When you need to use the pump for inflation, please block the hoses to prevent water from
escaping, then disconnect the pump, screw on the cap (P00217) to avoid water coming out
from the air pipe.
Cover Maintenance
The cover shall be cleaned inside and out periodically using a suitable solution that includes
adequate disinfection (e.g. 10 mg/l of Free Chlorine).
Filter Cartridge Maintenance
To ensure your spa water stays clean, check and clean your filter cartridges every day follow
the steps below. We recommend changing your filter cartridges every week or if the filter
cartridges remain soiled and discoloured, they should be replaced.
Filter Cartridge
Filter Set
Advertisement
Table of Contents
