Advertisement
Installation Manual
5.0 MAINTENANCE
It is important that maintenance checks are recorded and that the
schedule is always adhered to, in all cases, the previous report should
be referred to.
5.1 Annually
•Thoroughly inspect the unit and its components for corrosion,
acting immediately to treat/restore any damaged areas.
The front cover can be removed and cleaned with water and a mild
detergent using a soft cloth and the motor fan assembly can be
cleaned with a dry brush or dry cloth. Ensure the unit does not
come into contact with any kind of liquid or solvent.
•All electrical terminals within the unit should be tightened.
6.0 WARRANTY
The 1 year warranty starts from the day of delivery.
This warranty is void if the equipment is modified without
authorisation, is incorrectly applied, misused, disassembled, or not
installed, commissioned and maintained in accordance with the details
contained in this manual and general good practice.
The product warranty applies to the UK mainland and in accordance
with Clause 14 of our Conditions of Sale. Customers purchasing from
outside of the UK should contact Nuaire International Sales office for
further details.
Failure to maintain the unit as recommended will invalidate the
warranty.
7.0 END-OF-LIFE AND RECYCLING
Where possible Nuaire use components which can be largely recycled
when the product reaches its end-of-life:
•Fans, motors, controls, actuators, cabling and other electrical
components can be segregated into WEEE recycling streams.
•Sheet metal parts, aluminium extrusion, heating/cooling coils and
other metallic items can be segregated and fully recycled.
•EPP, plastic ducting, nylon corner pieces, plastic heat exchangers,
packaging material and other plastic components can be
segregated into mixed plastic and widely recycled.
•Cardboard packaging, wood, used filters and other paper
components can be largely recycled or fully processed in energy
from waste centres.
•Remaining Items can be further segregated and processed in
accordance with the zero waste hierarchy. Please call After Sales
Support for further information on items not listed above.
IMPORTANT
Ensure that Nuaire product is made safe from any electrical
/ water / refrigerant supplies before dismantling commences.
This work should only be undertaken by a qualified person in
accordance with local authority regulations and guidelines,
taking into account all site based risks.
Technical or commercial considerations may, from time to time, make it necessary to alter the design, performance and dimensions of equipment
Nuaire |
Western Industrial Estate
and the right is reserved to make such changes without prior notice.
|
|
| nuaire.co.uk
Caerphilly
CF83 1NA
8.0 AFTER SALES
For technical assistance or further product information, please contact
the After Sales Department.
Telephone 02920 858 400
aftersales@nuaire.co.uk
20. 03. 20. Document Number 671421
SLIMAIRE / NA XPC
4
Advertisement
