Download Print this page
NuAire SLIMAIRE Installation Manual

NuAire SLIMAIRE Installation Manual

12v & 230v, continuous 2 speed slimline axial fans

Advertisement

Quick Links

1.0 SAFETY INFORMATION
The provision of the electrical supply and the connection of the unit to the mains must be
carried out by a qualified electrician.
Isolate from power supply before removing any covers. During installation / maintenance ensure
all covers are fitted before switching on the mains supply.
All-pole disconnection from the mains as shown in the wiring diagram must be incorporated
within the fixed wiring and shall have a minimum contact separation of 3mm in accordance with
latest edition of the wiring regulations.
Ducting must be securely fixed with screws to the spigot to prevent access to live parts. Duct
runs terminating close to the fan must be adequately protected by suitable guards.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
Precautions must be taken to avoid the back-flow of gases into the room from the open flue of
gas or other fuel-burning appliances.
This appliance should not be used by children or persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge, unless they have been given supervision
or instruction concerning the safe use of the appliance by a person responsible for their safety.
Children shall not play with the appliance. Cleaning and user maintenance shall not be carried
out by children.
1.1 Hazard Symbols
GENERAL WARNING
Signifies a general warning regarding hazard specified by supplementary information.
ELECTRIC SHOCK
This unit must be completely electrically isolated before any panels are removed. Check
mains supply and control connections.
ROTATING PARTS
This unit contains fast moving rotational parts which may start automatically. It is the
sole responsibility of the installer to adequately guard these components.
REFER TO INSTRUCTION MANUAL
Read and understand the installation and maintenance manual before installing,
operating or maintaining this product.
Nuaire |
Western Industrial Estate
SLIMAIRE / NA X
12V & 230V, Continuous 2 Speed Slimline Axial Fans
Installation Manual
|
|
| nuaire.co.uk
Caerphilly
CF83 1NA
IPX4
20. 03. 20. Document Number 671421
EMC Directive
2014/30/EU
LVD Directive
2014/35/EU
1

Advertisement

loading

Summary of Contents for NuAire SLIMAIRE

  • Page 1 SLIMAIRE / NA X 12V & 230V, Continuous 2 Speed Slimline Axial Fans EMC Directive 2014/30/EU Installation Manual IPX4 LVD Directive 2014/35/EU 1.0 SAFETY INFORMATION • The provision of the electrical supply and the connection of the unit to the mains must be carried out by a qualified electrician.
  • Page 2 •SLIMAIRE / NA 150X fans - 150mm Ø - for through wall installation. 2.0 INTRODUCTION •SLIMAIRE / NA 150X fans - 156mm Ø - for installation using a wall These IPX4-Splashproof fans have been specifically designed to liner or telescopic ducting.
  • Page 3 Installation Manual SLIMAIRE / NA XPC 4.2.3 SLIMAIRE/NA 100XPC-12 with Integral Cord Unit Codes m³/hr dBA @ 3m NA / SLIMAIRE 100X Wiring - SLIMAIRE/NA 100XPC-12 NA / SLIMAIRE 150X Transformer 4.0 ELECTRICAL INSTALLATION 4.1 Electrical Information IMPORTANT Isolation - Before commencing work make sure that the unit is electrically isolated from the mains and switched live supply.
  • Page 4 The product warranty applies to the UK mainland and in accordance with Clause 14 of our Conditions of Sale. Customers purchasing from outside of the UK should contact Nuaire International Sales office for further details. Failure to maintain the unit as recommended will invalidate the warranty.

This manual is also suitable for:

NaxNa100xpcNa100xpc-12Slimaire100xpc-12Slimairex100pcNa150xpc ... Show all