Specifications - Omron H7BR Series Manual

H7BR

Specifications

Model
Classification Digital preset counter
Mounting method Flush mounting
External connections Screw terminals
Enclosure ratings IP54 (panel surface)
Approved standards UL508, CSA C22.2 No.14, conforms to EN61010-1/IEC61010-1, EN50081-2, and EN50082-2
Input modes* Up (Incrementing), Down (decrementing), and
reversible
Up/Down A (command inputs),
Up/Down B (individual inputs),
Up/Down C (quadrature inputs)
Output modes* N, F, C, R, K, P, Q, A
Reset system External, manual and automatic resets (internal
according to C, R, P, AND Q mode operation)
Prescaling function Yes (0.001 to 99.999)
Decimal point Yes (Rightmost 3 digits)
adjustment
Teaching function ---
Batch counting function Yes
Set compensation ---
Gate input Yes
Sensor power supply 12 VDC/24 VDC (switching)
Input signals Count, reset, key protection, and gate inputs
Batch count reset input
Input method No-voltage input: Via opening and closing of contact
Voltage input:
Control outputs 1 stage model: SPST-NO contact and transistor (NPN or PNP open collector) output
2 stage model: 2 stages of SPST-NO contact and transistor (NPN or PNP open collector) output
Transistor output can be changed by switch. (Except for batch count output.)
Batch outputs Transistor output (NPN or PNP open collector)
Display LCD with backlight
Digits 6 digits (0 to 999,999)
Memory backup Backup time for power interruption: Approx. 10 years at 20°C (lithium battery)
H7BR-B (Standard type)
Via high and low signal voltage (key protection is no-voltage input)
H7BR-C (±Range type)
Reversible
Up/Down A (command inputs),
Up/Down B (individual inputs),
Up/Down C (quadrature inputs)
K, D, L, H
External and manual resets
Yes
---
Yes
Compensation input
---
±6 digits (-999,999 to 999,999)
H7BR
3