Using Rinse Aid - Fisher & Paykel DW24U2I User Manual

C2, C4 Dishwasher
We highly recommend using liquid rinse aid regularly to get the best drying results.
Rinse aid gives a streak-free, sparkling clean look to glass and chinaware. In addition,
it prevents metal from tarnishing.
When to refill the rinse aid dispenser
When rinse aid level becomes low, the rinse aid
indicator on the control panel will light up to remind
you to refill the dispenser.
Adjusting the rinse aid dosage
The normal, factory-set dosage level is 5, but you
may need to adjust this to suit your water conditions.
If there is excessive foaming at the end of the wash,
z z
reduce the dosage.
If you live in a hard water area or if dishes are wet or
z z
streaky after drying, increase the dosage.
To adjust the rinse aid setting: see 'User preference
z z
settings' for how to do this.
If you are using tablets with built-in rinse aid, we
z z
recommend setting the rinse aid dosage level to
rA-
off ( ).
How to refill the rinse aid dispenser
Pull the rinse aid dispenser cover open using the end tab.
1
Pour rinse aid into the rectangular opening, making sure
2
not to fill beyond the MAX marking.
IMPORTANT!
Take care not to spill rinse aid into the dishwasher. Any spills must be wiped up to
prevent excess foaming. Failure to do so may result in a service call, which will not be
covered by warranty.
Close the cover, making sure it clicks shut.
3
End tab

USING RINSE AID

Fill opening
EN
C6 Dishw
Rinse aid indicator
(on control panel)
21