Cleaning the spray arms
Limescale and food particles in the wash water can block the holes in the spray arms
and the arm mountings. Clean these parts about once a month, or more often should
the need arise.
Cleaning the upper spray arm/head
Do not remove the upper spray arm for cleaning. Clean with a small plastic-bristled
brush, or if heavily soiled or blocked use a dishwasher cleaner/descaler following the
manufacturer's instructions.
Cleaning the centre spray arm
To remove the centre spray arm, carefully unscrew its locking nut.
z
z
Rinse the spray arm thoroughly under running water, then refit.
z
z
IMPORTANT!
Make sure you twist the locking nut on the centre spray arm firmly back on the water
z
z
supply tube.
Check that the centre spray arm is firmly locked in place and rotates freely.
z
z
Cleaning the lower spray arm
To remove the lower spray arm, simply lift the spray arm off its mounting.
z
z
Rinse the spray arm thoroughly under running water, then refit it on its mounting.
z
z
CARE AND CLEANING
Lower spray arm
EN
Water supply tube
Locking nut
Centre spray arm
25