Remove Grille And Panel; Remove Axial Flow Blade; Remove Moto - Gree GWH09QD-S6DBC2A/I Service Manual

Service Manual
Steps
4.

Remove grille and panel

Twist off the screws connecting the grille and
panel, and then remove the grille.
Twist off the screws connecting the panel, chassis
and motor support with screwd-river, and then
remove the panel.
5.

Remove axial flow blade

Twist off the nuts on blade with wrench and then
remove the axial flow blade.
6.Remove motor
Twist off the tapping screws fixing the motor, pull
out the pin of leading wire for motor and then
remove the motor.
Installation and Maintenance
Procedure
grille
axial flow blade
motor
panel
111