Vaisala MD30 Setup Manual page 5

Setting up Data Transfer
Cabling
2
Pair the mobile phone with the
Bluetooth module, which is shown
with a serial number. The serial
number is marked on the cover of
the Bluetooth module enclosure.
When paired, select the small
arrow to go back.
There is a notification about
4
the need to calibrate. Ignore
the message, and the phone
starts to show measurement
data (calibrate later in step 4.1).
Install the mobile phone holder
on the vehicle dashboard or on
5
the windshield.
In the RoadAI menu, select
6
Camera View and verify that
the camera has a clear view of
the road.
M212169EN-C
In the RoadAI phone app,
1
select the menu.
From the menu, select
Sensor > Bluetooth pairing.
Select the menu. Select
3
Sensor, and the sensor
you just paired.
Continue to step 4.1.