4 Installation
4.6 Connect the optional storage tank
1. If the unit is a simplex configuration, then install the tank to the top connection of the
discharge cross as shown:
1. Storage tank
2. Discharge gauge
2. If the unit is a duplex configuration, then connect the tank to the discharge manifold as
shown:
1. Storage tank
2. Discharge gauge
3. Precharge the tank according to the tank-specific IOM.
4.7 Connect the optional low-suction pressure switch
1. If the unit is a simplex configuration, then install the low-suction pressure switch piped
to the 1/4 in. inlet tap on the check valve as shown:
18
1
2
1
2
AquaBoost VS Pumping Packages INSTRUCTION MANUAL