Launch Creader Professional 129i User Manual page 23

LAUNCH
In above figure, the tested system with fault code appears in red and the system
with OK displays in black (normally).
On-screen Buttons:
: Tap to display the details of DTCs existing in the current system. Tap
hide it.
Enter: Tap to select other test functions. For detailed operations, refer to Chapter
5.2.2.2 "System Selection".
Report: Tap to save the diagnostic result as a report.
Clear DTC: Tap to clear the existing diagnostic trouble codes.
5.2.2.2 System Selection
This option allows you manually select the test system and function step by step.
In Fig. 5-5, tap "System Selection", and tap the desired system (take "ECM" for
example) to jump to the test function page.
User Manual
Fig. 5-5
Fig. 5-6
EN
to
17