TESY DHF22CEL Usage And Storage Instructions page 4

DRAINING THE COLLECTED WATER
EN
When the drainage tank is full, the tank full indicator
light will turn on, the operation will stop automatically
and the buzzer will beep 15 times to alert the user, that
the water need to be emptied from the drainage tank.
Emptying the Drainage Tank
•
Lightly press on the sides of the tank with both
hands and pull the tank out gently.
•
Discard the collected water.
Note
1. Do not remove the float from the water tank. The
water full sensor will no longer be able to detect
the water level correctly without the float and water
may leak from the water tank.
4
Usage and Storage Instructions
2. If the drainage tank is dirty, wash it with cold or
lukewarm water. Do not use detergent, scouring
pads, chemically treated dust cloths, gasoline,
benzene, thinner, or other solvents, as these can
scratch and damage the tank and cause water
leakage.
3. When replacing the drainage tank, press the tank
firmly into place with both hands. If the tank is not
positioned properly, the "TANK FULL" sensor will be
activated, and the dehumidifier will not operate.
Continuous Water Drainage
The unit features a continuous drainage port .Using a
plastic pipe (with an inner diameter of 10mm)
The water in the drainage tank can be continuously
drained out from the continuous port on the unit.
EN